Fluke DTX Series - Finding Connections with FindFiber; Using FindFiber in Smart Remote Mode

DTX Series CableAnalyzer
Technical Reference Handbook
5-40
Finding Connections with FindFiber
The FindFiber

function helps you trace connections at
patch panels and quickly check fiber continuity.
Note
The FindFiber function is not available in Far End
Source mode.
Using FindFiber in Smart Remote Mode
Use the FindFiber function in Smart Remote mode to help
you determine which fibers go to which connectors at a
patch panel.
Figure 5-19 shows the equipment needed for using
FindFiber in Smart Remote mode.