Fluke DTX Series - Moving or Copying Results to a Memory Card (DTX-1800, DTX-1200); Deleting Results

Memory Functions
Viewing and Managing Saved Results
8
8-7
Moving or Copying Results to a Memory Card
(DTX-1800, DTX-1200)
To move or copy all results from internal memory to
the memory card:
1 Turn the rotary switch to SPECIAL FUNCTIONS.
2 Select Move/Copy Internal Results; then select an
option:
• Move to Memory Card: Moves all results and
their folders to the memory card and deletes
all results from internal memory.
• Copy to Memory Card: Copies all results and
their folders to the memory card.
• Delete from Internal Memory: Deletes all
results from internal memory.
The tester displays a message if it cannot move or copy
a result. This occurs in the following cases:
• A result with the same ID and timestamp already
exists on the memory card.
• The memory card is full.
• The memory card is not formatted or is damaged.
Deleting Results
To delete results:
1 Turn the rotary switch to SPECIAL FUNCTIONS.
2 Use
D to highlight View/Delete Results;
then press
H.
3 If necessary, press
J Change Folder to find the
result(s) you want to delete.
4 Press
K Delete; then use D to highlight an
option:
• Current Result: Deletes the result highlighted
on the previous screen.
• All Results in Folder: Deletes all results in the
current folder.
• All Results in Tester: Deletes all results in
internal memory. For the DTX-1200 and
DTX-1800, this option also deletes all results
on the memory card if one is present.
• Current Folder: Deletes the current folder and
all its contents.
5 Press
L Delete.