Fluke DTX Series - Service Calibration Period; Standard Link Interface Adapters; Cable Types Tested

Maintenance and Specifications
Specifications 9
9-15
9Warning
Under no circumstances is this product intended
for direct connection to telephony inputs,
systems, or equipment, including ISDN inputs.
Doing so is a misapplication of this product,
which could result in damage to the tester and
create a potential shock hazard to the user.
Service Calibration Period
One year.
Standard Link Interface Adapters
• Cat 6/Class E permanent link adapters
Plug type and life: shielded 8-pin modular (RJ45);
>5000 insertions
Tests supported: shielded and unshielded cable, TIA
Cat 3, 4, 5, 5e, and 6 and ISO/IEC Class C and D, and E
permanent link
• Cat 6/Class E channel adapters
Plug type and life: shielded 8-pin modular (RJ45);
>5000 insertions
Tests supported: shielded and unshielded cable, TIA
Cat 3, 4, 5, 5e, and 6 and ISO/IEC Class C and D
channels
Cable Types Tested
Shielded and unshielded twisted pair (STP, FTP, SSTP, and
UTP) LAN cabling:
• TIA Category 3, 4, 5, 5e, and 6: 100 Ω
• ISO/IEC Class C and D: 100 Ω and 120 Ω
Note
For availability of additional adapters that allow
testing to other performance standards,
different cabling types, or fiber optic cabling,
contact Fluke Networks.