Fluke DTX Series - Checking the Memory Status

DTX-Series CableAnalyzer
Technical Reference Handbook
8-2
Checking the Memory Status
To check the memory status, the rotary switch to
SPECIAL FUNCTIONS, use
D to highlight Memory
Status; then press H.
Or, press
L Memory from the main Autotest
screen.
Figure 8-1 describes the memory status screen.
1
2
3
4
5
6
amd108f.eps
A The memory status currently displayed. is shown for
internal memory.
is shown for the memory card
(DTX-1800, DTX-1200)
DTX-1800/DTX-1200: Press
A to switch between the
memory card and internal memory status.
B The bar graph shows the space used in the current memory
destination.
C The number of results saved in the location being displayed.
D The approximate number of results you can save in the
location being displayed. The exact number depends on the
selected test limit and other test settings, as well as the
length of the cables you test.
E DTX-1800/DTX-1200: Press A to switch between the
memory card and internal memory status.
F DTX-1800/DTX-1200: Press K to format the memory card,
if present.
Figure 8-1. Memory Status Screen Features