Fluke DTX Series - Setting the Storage Location (DTX-1800 and DTX-1200)

Getting Acquainted
Overview of Memory Features 1
1-27
5 DTX-1800, DTX-1200: Press J if necessary if you
want to create the folder on the memory card.
6 Press
L Create Folder.
7 Use
JKL, BCAD, and H to
enter a folder name. Press
N when you are done.
8 Use
AD to highlight the new folder in the
list of folders; then press
H.
Setting the Storage Location (DTX-1800 and
DTX-1200)
To set the destination for saved results on a DTX-1800 or
DTX-1200 tester:
1 Turn the rotary switch to SETUP, use
D to
highlight Instrument Settings; then press
H.
2 Use
D to highlight Result Storage Location;
then press
H.
4 Use
D to highlight Internal Memory or Memory
Card (if present); then press
H.
Note
If you change storage location, and the selected
Current Folder does not exist in the new
location, the tester creates a new folder with the
current folder’s name in the new location.
See Chapter 8 for more information on memory features.