Fluke DTX Series - Memory Card Care (DTX-1800, DTX-1200); Uploading Results to a PC

Memory Functions
Memory Card Care (DTX-1800, DTX-1200) 8
8-9
Memory Card Care (DTX-1800, DTX-
1200)
• Clean the card by wiping it with a slightly damp
cloth. If the card’s electrical contacts are dirty, use
a pencil eraser to clean them.
• Keep the card out of direct sunlight and away
from extreme heat or humidity.
• Do not drop the card on hard surfaces.
• Keep the card dry.
Uploading Results to a PC
To upload results to a PC:
1 Install the latest version of LinkWare software on
your PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
included or the DTX serial cable available from
Fluke Networks.
or
Insert the memory card containing results into the
PC’s memory card reader.
4 Start LinkWare software on the PC.
5 Click Import
on the LinkWare toolbar. Select
the tester’s model from the list.
or
Select Memory card or folder on PC.
6 Select the records you want to import; then click
OK.
See the LinkWare online help for details on creating
reports with LinkWare.