Certifying Fiber Optic Cabling
Running Single Tests 5
5-49
Running Single Tests
The tester’s SINGLE TEST mode lets you run individual
tests for isolating cabling failures and quickly testing
repairs.
In the SINGLE TEST mode, you can run and save the
following tests individually:
• Loss
• Length (includes propagation delay)
• Power meter measurement
Using the Remote Tester with an
OptiFiber
Tester
You can use a DTX Series smart remote with a fiber
module as the remote for a Fluke Networks OptiFiber
Certifying OTDR. The DTX remote takes the place of a
second OptiFiber tester for measuring loss and length
with the OptiFiber loss/length option in Smart Remote
mode. You can buy a smart remote separately for this
purpose. See the Fluke Networks website or contact Fluke
Networks for details.
To Next Page
Loading...
