DTX Series CableAnalyzer
Technical Reference Handbook
5-48
1
2
Results for SINGLE TEST mode
(Smart Remote mode)
2
3
amd106f.eps
1
2 3
Results for MONITOR mode
amd107f.eps
A Meters showing the power readings taken at each
wavelength. The tester takes one measurement for
each wavelength.
B Power readings in decibels (dB) or microwatts (µw).
C To switch between decibels and microwatts, press J.
A Meter showing the power reading. The reading updates
continuously until you press
I.
B To switch between decibels and microwatts, press J.
C To switch wavelengths, press L Change λ.
Figure 5-26. Power Meter Screens
To Next Page
Loading...
