Fluke DTX Series - Changing Folders

DTX-Series CableAnalyzer
Technical Reference Handbook
8-4
You can also create a new folder from the
View/Delete Results screen:
1 Turn the rotary switch to SPECIAL FUNCTIONS.
2 Use
D to highlight View/Delete Results; then
press
H.
3 Press
J Change Folder.
4 DTX-1800, DTX1200: Use
J to select the
location (memory card or internal memory) for
the new folder.
5 Press L Create Folder.
6 Use the softkeys,
BCAD, and H to
enter a folder name. Press
N when you are
finished.
Note for DTX-1800, DTX-1200
If you change the Result Storage Location,
and the selected Current Folder does not exist
in the new location, the tester creates a new
folder with the current folder’s name in the
new location.
Changing Folders
To change the current folder:
1 Turn the rotary switch to SETUP.
2 Use
D to highlight Instrument Settings; then
press
H.
3 Use
D to highlight Current Folder; then press
H.
4 DTX-1800, DTX1200: Use
J to select the
location (memory card or internal memory) of the
folder you want.
5 Use AD to highlight a folder name;
then press
H.
You can also change the current folder from the
View/Delete Results screen:
1 Turn the rotary switch to SPECIAL FUNCTIONS.
2 Use
D to highlight View/Delete Results; then
press
H.
3 Press
J Change Folder.
6 Use AD to highlight a folder name;
then press
H.