Fluke DTX Series - Step 5: Saving the Results; Certifying Fiber Cabling; Required Equipment

DTX Series CableAnalyzer
Technical Reference Handbook
2-12
Step 5: Saving the Results
5-1 Press N.
5-2 Use the text editing screen to enter a name for the
results. See Figure 2-1 on page 2-3 for details on
editing text.
5-3 Press
N when you are done.
This concludes the tutorial on testing twisted pair
cabling. For more information on testing twisted pair
cabling, see Chapter 3.
Certifying Fiber Cabling
This section familiarizes you with the optional DTX-MFM
and DTX-SFM fiber modules by guiding you through the
following tasks:
• Installing fiber modules
• Checking the battery status and verifying operation
with the fiber modules
• Setting a reference in Smart Remote mode
• Running an Autotest in Smart Remote mode
• Viewing the Autotest results
• Saving the results
Required Equipment
Figure 2-7 shows the equipment for testing fiber cabling
in Smart Remote mode.