Getting Acquainted
Basic Features 1
1-23
1
5
6
7
8
10
2
3
4
9
amd05f.eps
A The media type selected for testing. Press J to change
media.
B Battery status icon.
C Test Limit: The tester compares test results to the selected
limit to determine the PASS/FAIL result.
D Cable Type: The type of cable to be tested.
E Press L to check the memory status.
F Press K to view the results of the previous test.
G Press J to change the type of media you will test.
H Store Plot Data: Yes: the tester saves graphical plot data for
twisted pair tests with frequency-based results. This lets you
include plots on the test reports you create in LinkWare
software. No: plot data is not saved. Only the worst value
and worst margin results are saved.
I Folder: The folder where results will be saved.
J Operator, Site: The person using the tester. Site: The job site
name. These are stored with saved results.
Figure 1-10. The Main Autotest Screen (for Twisted Pair Media)
To Next Page
Loading...
