Rev 4/2018
97
LUBRICATION AND MAINTENANCE
ITEM
ITEM
DESCRIPTION
POINTS DESCRIPTION
APPROVED
MATERIAL
16,17 Engine*air intake system 1 Check hoses and connections
15 Engine* fuel filter 1 Replace
38 Engine* fan belt 1 Check tensioner and belt wear
11 Engine* coolant 1
Check cooling system. Do coolant solution analysis
and pressure test. Add supplemental coolant additives
as required.
Engine* speed Check engine speeds.
Engine* thermostats Test thermostats.
Every 800 Hours or
Each Season
3 Wheel drives 2 Replace oil
SAE 85W/140
API-GL5
Each Season
*Engine, see engine manufacturer's operator's manual
Operator presence
switch
Check operator presence switch
9 Oil cooler-a/c condenser 1 Clean debris from fins
11 Radiator 1 Clean debris from fins
17 Engine* air filters 1 Replace
24 Seat belts 2 Inspect seat belt components for excessive wear
25
Torque shaft bearing
housing
1 Grease
26 Steering components 6 Grease
31 Side plate bearings 2 Grease
Every 2000 Hours
Engine, see engine manufacturer's operator's manual
14 Engine* valve clearance 1 Check and adjust. (See your john deere dealer.)
11 Engine* coolant 1
Pressure test, flush cooling system and replace
coolant.
Engine* thermostats Test thermostats.
Every 2000 Hours or
Every Other Season
Engine, see engine manufacturer's operator's manual for optional
intervals.
18 Hydrostatic 1 Replace oil. Clean fill cap and strainer. J20C HY-GARD®
To Next Page
Loading...