Control panel 82
Assembling system components - conventional robot 85
General 87
Safety 87
Assembly sequence, conventional robot 87
Fitting the SplitBox SB 500i R 88
Fitting the wirefeeder holder 88
Fitting the SB 500i R 88
Fitting the SB 500i R (left variant) 88
Fitting the CrashBox /i to the robot 89
Fitting the CrashBox /i to the robot 89
Installing the CrashBox/i Dummy on the robot 90
Fitting the WF Robacta Drive to a conventional robot 92
Fitting the hosepack to the WF Robacta Drive (conventional) 92
Fitting the WF Robacta Drive to the robot (conventional) 93
Fitting the WF Robacta Drive to the robot 94
Optimum hosepack arrangement 95
Fitting the interconnecting hosepack 96
Fitting the Standard interconnecting hosepack to the robot 96
Connecting the MHP W hosepack 97
Connecting the MHP W hosepack 97
Connecting the SplitBox SB 500i R to the system components 100
Safety 100
General 100
Connecting the SplitBox SB 500i R to the system components 100
Assembling system components - PAP robot 103
General 105
Safety 105
Assembly sequence, PAP robot 105
Maximum axis rotation 106
Fitting the SplitBox SB 500i R PAP 107
Fitting the SB 500i R PAP 107
Installing the CrashBox Drive /i PAP on the robot 108
Installing the CrashBox Drive /i PAP on the robot 108
Installing the CrashBox Drive /i PAP Dummy on the robot 109
Fitting the WF Robacta Drive to a PAP robot 111
Fitting the hosepack to the WF Robacta Drive (PAP) 111
Fitting the WF Robacta Drive to the robot (PAP) 112
Fitting the interconnecting hosepack 115
Fitting the PAP interconnecting hosepack to the robot 115
Connecting the SplitBox SB 500i R PAP to the system components 116
Safety 116
General 116
Connecting the SplitBox SB 500i R PAP to the system components 116
Assembling further system components 119
Fitting the SplitBox SB 60i R 121
Fitting the SB 60i R to the robot 121
Fitting the SB 60i R to the balancer 121
Mounting the SB 60i R on the wall 122
Connecting the torch hosepack to the SplitBox SB 60i R 123
Fitting the TPSi wire buffer 124
Fitting the TPSi wire buffer 124
Connecting the control line to the wire buffer 125
Fitting the unreeling wirefeeder 126
Fitting the unreeling wirefeeder 126
Connecting the extension hosepack 127
Connecting the extension hosepack 127
Fitting the torch body to the WF Robacta Drive 129
5
EN
To Next Page
Loading...
Need help?
General
