Fuji Xerox ApeosPort-II C4300 - Changing the Scan Settings

Operations during Faxing
113
Fax
4
Changing the Scan Settings
You can change the scan settings while scanning the document.
1 Press [Stop] button on the touch
screen, or press <Stop> button on
the control panel..
2 Select [Change Settings...].
3 Set the [Resolution], [Scan Size], and [Lighten/Darken].
For each setting, refer to "Resolution (Specifying the Scanning Resolution)" (P.128), "Original Size
(Specifying the Scan Size for the Original)" (P.129), "Lighten/Darken (Adjusting Density Level)"
(P.126).
4 Press the <Start> button.
123
456
789
0 #
C
<Stop> button