10 System Settings
350
System Settings
10
Note • When [Save in Charge Print] is selected, the Security Print, Sample Print, and Delayed Print
settings specified on the print driver will be ignored.
Fax Billing Data
You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Administration prior to the operations. For details on how to enable the fax feature, refer to
Auditron Mode (P.351).
Note • Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to Billing - Day Time, Billing - Night
Time, Billing - Midnight (P.338).
• The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to Billing Data List (P.382).
1 Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to System
Settings Procedure (P.258).
2 Select [Fax Billing Data] and select
[Change Rate Per Unit].
Charge Rate Per Unit
This is a communication charge per unit.
3 Select [Change Settings].
4 Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5 Select [Save].
Passcode Entry from Control Panel
You can set whether a passcode is required when the system administrator or a user
uses the machine. Select [On] to enable System Administrator’s Passcode (P.342),
and Passcode (P.345) for [Create/Check User Accounts].
Select [Off] to not require the passcode, even if a passcode is set in the above
procedures.
Important • The setting of [Passcode Entry from Control Panel] is used for authentication on the
machine. A password must always be entered when accessing from remote devices using
CentreWare Internet Services or the like, regardless of the use of password setting.
Depending on authentication procedures, a passcode may be required for other processes
as well.
Note • The system administrator’s password is also required when you change settings from
CentreWare Internet Services.
Login Setup/Auditron Mode
Set whether the Auditron administration feature is enabled or not, and whether to
request an authentication operation.
To Next Page
Loading...
