Operations during Scanning
173
Scan
5
Changing the Scan Settings
You can change the scan settings while scanning the document.
1 Press either [Stop] on the touch
screen or the <Stop> button on the
control panel..
2 Select [Change Settings...].
3 Set the [Resolution], [Scan Size], and [Lighten/Darken].
For each setting, refer to "Scan Resolution (Specifying a Scanning Resolution)" (P.194), "Original Size
(Specifying an Original Size)" (P.196), "Image Options (Adjusting Scan Density and Image Sharpness)"
(P.191), and "2 Sided Originals (Scanning Both Sides of a Document)" (P.194).
4 Press the <Start> button.
123
456
789
0 #
C
<Stop> button
To Next Page
Loading...
