Fuji Xerox ApeosPort-II C4300 - Image Shift (Shifting the Image Copy Position); Edge Erase (Erasing Edges and Margin Shadows in the Document); Lighten;Darken (Adjusting the Copy Density)

Copy
63
Copy
3
1 Select [Single Color].
2 Select [Color].
3 Select a color.
Image Shift (Shifting the Image Copy Position)
This feature is the same as [Image Shift] of the [Layout Adjustment] screen. Refer to "Image Shift
(Shifting the Image Copy Position)" (P.74).
Edge Erase (Erasing Edges and Margin Shadows in the Document)
This feature is the same as [Edge Erase] of the [Layout Adjustment] screen. Refer to "Edge Erase
(Erasing Edges and Margin Shadows of the Document)" (P.74).
Lighten/Darken (Adjusting the Copy Density)
You can adjust the copy density to one of 7 levels. The copy density becomes darker
when you move [ ] to the left and lighter when you move it to the right.
Note • [Lighten/Darken] of the [Copy] screen and [Lighten/Darken] of [Lighten/ Darken/Contrast] in
the [Image Quality] screen are the same.
1 Use [ ] and [ ] to select from 7
density levels.