Network Settings
301
System Settings
10
Machine’s E-mail Address/Host Name
Set the e-mail address and host name for the machine. In [Machine’s E-mail Address/
Host Name], you can set the following items.
For information on e-mail address/host name of the machine, refer to the Network Administrator Guide.
Outgoing / Incoming E-mail Settings
Set e-mail transmission and reception.
POP3 Server Settings
Set the POP3 server. In [POP3 Server Settings], you can set the following items.
For information on POP server settings, refer to the Network Administrator Guide.
SMTP Server Settings
Set the SMTP server. In [SMTP Server Settings], you can set the following items.
For information on SMTP server settings, refer to the Network Administrator Guide.
Domain Filter
Set accepted domains. In [Domain Filter], you can set the following items.
For information on domain filter, refer to the Network Administrator Guide.
PKI (Public Key) Settings
Set the HTTP-SSL/TLS.
Note • Before setting the HTTP-SSL/TLS communications, the device certificate must be set. For
information on the device certificate, refer to the Network Administrator Guide.
HTTP - SSL/TLS Settings
Set the SSL/TLS.
îš„Device Certificate - Server
You can select a certificate to be linked.
1. E-mail Address
2. Host Name
3. Domain Name
1. POP3 Server Server Setup 5. POP3 Server Check Interval
2. POP3 Server IP Address 6. POP3 Server Login Name
3. POP3 Server Server Name 7. POP3 Server Password
4. POP3 Server Port Number 8. POP Password Encryption
1. SMTP Server Setup 5. E-mail Send Authentication
2. SMTP Server IP Address 6. SMTP AUTH Login Name
3. SMTP Server Saver Name 7. SMTP AUTH Password
4. SMTP Server Port Number
1. Domain Filtering 2. Domains 1 to 50
To Next Page
Loading...
Need help?
General
