3 Copy
84
Copy
3
1 Select any item.
îš„No Fold & Staple
No Finishing is carried out.
îš„Folding Only
Outputs copies folded in half.
îš„Fold & Staple
Outputs copies folded in half and stapled at the center.
Covers (Attaching a Cover to Copies)
You can make copies with a cover attached.
The front cover can be output before the first page of the document on a different type
of paper (e.g. colored paper or heavyweight paper).
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• When making 2-sided copies, copies are made on both sides of the top cover/back cover in
accordance with the page order of the document.
1 Select [Covers].
2 Select any item.
îš„No Covers
No cover is added.
îš„Front Cover Only
Make copies with a cover output on a different type of paper before the first page of the
document. Also, if [On] of [Printed Covers] is selected, the first page of the document
can be copied on the different type of paper added as a front cover.
îš„Front & Back Covers
Outputs covers on a different type of paper before the first page and after the last page
of the document. Also, if [On] of [Printed Covers] is selected, copies can be made on a
different type of paper for the cover on the first page and last page of the document.
îš„Covers
z
Blank Covers
A blank sheet of paper is attached as the cover.
z
Printed Covers
The first page of the document is copied on the cover. When you only want to copy
to the outside of the cover, insert a blank sheet of paper in the second page of the
document.
îš„Paper Tray Settings
Displays the [Covers-Paper Tray Settings] screen.
To Next Page
Loading...
Need help?
General
