System Administrator Settings
343
System Settings
10
3 Enter a new password (4 to 12 digits) in [New Password], and select [Next].
4 In [Re-enter Password], enter the same password, and select [Save].
Note • To set no password, leave the password blank, and select [Save].
Maximum Login Attempts
This feature protects the settings from being changed by an outsider pretending a
system administrator. If authentication for a system administrator's ID fails more than
specified times continuously, access is denied.
You can specify a login attempt count in the range from 1 to 10.
Note • The failure count is reset when the machine is restarted.
• To chancel the access rejection state, restart the machine by turning off and on the power.
1 Select [Maximum Login Attempts].
2 Select [On].
3 With [ ] and [ ], set the number
of authentication attempts allowed.
4 Select [Save].
To Next Page
Loading...
