Fuji Xerox ApeosPort-II C4300 - Paper Jams at 2 A in the Finisher (Using the Wheel 2 C)

15 Problem Solving
536
Problem Solving
15
Paper Jams at 2a in the Finisher (Using the Wheel 2c)
1 If the edge of the jammed paper
comes out from the exit of the
output tray, gently pull out the
paper to remove.
2 Open the front cover of the finisher.
3 Move the lever 2a to the right.
4 Turn the wheel 2c in the direction
of the arrow to eject the jammed
paper.
5 Gently remove the paper.
6 Return the lever 2a to its original position.
7 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.