16 Appendix
566
Appendix
16
ESC/P Emulation Print Features
Multiple-Up
The multiple-up feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The multiple-up feature can be used in the ESC/P emulation mode. In the ESC/P mode,
2 Up can be used.
Form Overlay
In the ESC/P mode, you can register an original form to the printer, and overprint it on
a printed output.
A form to be overprinted can be specified on the control panel.
Barcodes
In the ESC/P mode, you can use barcodes. The barcodes that can be used are as
follows.
z
JAN code
z
CODE39
z
CODABAR
z
Industrial 2 of 5
z
Industrial 2 of 5
z
Interleaved 2 of 5
Forms
You can use ESC/P to register forms on the machine. Up to 64 forms can be registered.
ESC/P Emulation Settings
The following tables show the basic and extended settings that can be configured on
the ESC/P emulation mode menu.
Basic Settings
Setting Item
Item
Number
Value
Output color 5 Sets the color mode.
[0] (Default) : Color
[1] : Monochrome
To Next Page
Loading...
