Fuji Xerox ApeosPort-II C4300 - Operations During Copying; Stopping the Copy Job

Operations during Copying
53
Copy
3
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each feature.
Stopping the Copy Job ............................................................................................................... 53
Changing the Number of Copies................................................................................................ 54
Interrupting the Copy Job........................................................................................................... 54
Stopping the Copy Job
To cancel copying, follow the procedure below.
1 Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2 Select [Cancel].
When the screen in Step 1 does not appear
1 Press the <Job Status> button.
2 Select the job to cancel, and then
select [Stop].
123
456
789
0 #
C
<Stop> button
123
456
789
0 #
C
<Job Status>
button