Specifications
557
Appendix
16
îš„Print Feature Specifications
Weight
(excluding paper and
options)
ApeosPort-II C4300/C3300/C2200:166.0kg (3-tray model)
DocuCentre-II C4300/C3300/C2200:166.0kg (3-tray model)
Important • The weight is with a new toner cartridge without any paper.
Minimum Space
Requirements
ApeosPort-II C4300/C3300/C2200:
Width 967.0 × Depth 1219 mm (when the bypass tray is
extended completely)
DocuCentre-II C4300/C3300/C2200:
Width 967.0 × Depth 1214 mm (when the bypass tray is
extended completely)
Type Built-in
Continuous printing
speed
Same as the main unit
Important • The printing speed is reduced if [Print Mode] is set to [High
Resolution] on the PCL driver, or [Print Mode] is set to [High
Resolution] or [High Image Quality] on the PostScript driver.
• The performance may be reduced depending on the paper
type.
•
When sheets such as postcards, which are B5 in size
or narrower are output continuously, the non-paper
passage side on the fuser unit heats up. For this
reason, the message "Please wait" is sometimes
displayed and output is discontinued.
Printing
resumes after one to 2 minutes. The message "Please
wait" is also sometimes displayed and printing is
discontinued for 30 seconds or more when one sheet
of paper A5 in size or smaller has been printed.
Resolution Output resolution (Standard/Fine) : 600×600dpi (23.6×23.6
dots/mm)
Output resolution (High resolution)
*
: 1200×1200dpi (47.2×47.2
dots/mm)
* When the machine prints in High Resolution mode, the continuous
printing speeds for A4 paper are as follows in both monochrome
and color: ApeosPort-II C4300/DocuCentre-II C4300: 22 sheets/
minute, ApeosPort-II C3300/DocuCentre-II C3300: 15 sheets/minute,
ApeosPort-II C2200/DocuCentre-II C2200: 13 sheets/minute. For
DocuCentre-II C4300/C3300/C2200, an optional expanded memory
(256MB) is required depending on the document.
Page description
language
Standard : PCL6, PCL5c
Option : PostScript 3
Supported protocols Parallel (Optional):Compatible, Nibble, ECP
Ethernet : TCP/IP (SMB, LPD, Port9100, IPP), NetBEUI (SMB),
IPX/SPX (NetWare), EtherTalk (optional)
*
Important • EtherTalk is supported by Mac OS 7.5.3 - 9.2.2, and
Mac OS X 10.2.x/10.3.3 - 10.4.3
Supported operating
systems
PostScript (optional): Windows 95/98/Me English
Windows NT 4.0 English
Windows 2000/XP English
Windows Server 2003 English
Mac OS 7.5.3 - Mac OS 9.2.2 English
Mac OS X 10.1.5/10.2.x/10.3.3 - 10.4.3
English
Windows XP x64 Edition
Important • For information about the latest supported OS’s, refer to our
web page.
To Next Page
Loading...
Need help?
General
