Importing Scanned Data
231
Computer Operations
8
Importing Scanned Data
There are four methods for importing documents from a machine's mailbox to your
computer.
Importing to a TWAIN Compatible Application ..................................................................... 231
Importing Using Mailbox Viewer2 .......................................................................................... 233
Importing Using CentreWare Internet Services ....................................................................... 235
Importing with the WebDAV protocol .................................................................................... 236
Each procedure is as follows.
Importing to a TWAIN Compatible Application
The following describes how to import documents from a machine's mailbox to
application software.
Network Scan Driver is used to import stored documents.
Network Scan Driver is software to allow a client-side application to import documents
(scan data) from the machine's mailbox via the network.
For instructions on installing Network Scan Driver, refer to the manual contained in the CD-ROM of the
Driver CD Kit.
To learn about fields in the displayed dialog box, click [Help] to refer to the Network Scan Driver's
online help.
1 Launch application software to which documents are imported.
Important • The application must support TWAIN. TWAIN is a standard for scanners and other input
devices.
Note • For information on supported applications, refer to the "Readme" contained in the CD-ROM
of the Driver CD Kit.
2 From the [File] menu, select the command for selecting the scanner (source).
3 Select [FX Network Scan], and
click [Select].
4 From the [File] menu, select the
command for importing the image
from the scanner.
5 From the displayed list, click the
scanner name of the machine, and
click [Select Scanner].
Note • If no items are shown in the
list, click [Refresh]. The
application searches for
scanners.
• To display the scanner
names, use the dialog box
which can be displayed by clicking [Options]. For information on how to change the
displayed scanner names, refer to "Changing display of scanner names" (P.232).
• Only scanners on the network are automatically listed. To view scanners on other networks,
click [Options] to change the settings, and change IP Address and the scanner names. For
information on changing settings, refer to "Changing Network Scan Driver Settings" (P.232).
To Next Page
Loading...
Need help?
General
