Fuji Xerox ApeosPort-II C4300 - Operations During Scanning; Stopping the Scan Job

5 Scan
172
Scan
5
Operations during Scanning
The following describes the operations available during scanning. The following shows
the reference for each operation.
Stopping the Scan Job ...............................................................................................................172
Changing the Scan Settings.......................................................................................................173
Stopping the Scan Job
To cancel scanning, follow the procedure below.
1 Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2 Select [Cancel].
When the screen in Step 1 does not appear
1 Press the <Job Status> button.
2 Select the job to cancel, and then
select [Stop].
123
456
789
0 #
C
<Stop> button
123
456
789
0 #
C
<Job Status>
button