Power On / Off
35
Product Overview
2
Power On / Off
Turn on the power before operating the machine.
The machine is ready for operation within 45 seconds after the power is turned on. The
time may vary depending on the machine configuration.
Turn the machine off at the end of the day or when it is not in use for a long period of
time. Also, you can use the power saving feature when not in use for a while to reduce
the power consumption.
Important • Switching off the power of the machine may cause loss of data being processed.
For information on the power saving feature, refer to "Power Saver mode" (P.38).
Note • When the power is turned off, all functions of the machine will stop. Do not turn the
machine off if it is used all day for receiving faxes.
Powering On
The procedure for turning on the power is as follows.
1 Press the power switch to the [ | ]
position to turn the power on.
Note • The “Please wait...”
message indicates that the
machine is warming up.
The machine cannot be
used during warming up.
The machine will be ready
for operation within 45
seconds. The time may
vary depending on the
machine configuration.
Note • When the power does not
come on, check if the
power cord is plugged into
the power outlet and the
<RESET> button is in a
reset state (button is
pressed in).
To Next Page
Loading...
Need help?
General
