2 Product Overview
34
Product Overview
2
îš„C Finisher, C Finisher with Booklet Maker
Note • The C Finisher and C Finisher with Booklet Maker are optional. In text descriptions,
the C Finisher and C Finisher with Booklet Maker is abbreviated as "finisher".
No. Component Function
1 Front cover Open this cover to access the insides of the machine to clear paper or
staple jams, replace staples, or throw punch dust away.
2 Output tray Receives documents.
3 Exit cover Open this cover to access the insides of the machine to clear paper
jams.
4 Finisher tray Stapled documents are delivered.
5 Staple cartridge Contains staples. Pull out the cartridge to clear staple jams, or replace
staples.
6 Booklet tray
(For C Finisher with Booklet
Maker Only)
Documents are delivered here when Folding is selected in the booklet
creation function.
7 Booklet unit
(For C Finisher with Booklet
Maker Only)
This unit is for folding documents in half and stapling the folded
documents.
8 Center tray (Finisher
interface top cover)
Documents are delivered here when the output tray or finisher tray
cannot be used.
Open this cover upward to access the insides of the machine to clear
paper jams.
Note • Remove the documents output to the center output tray frequently.
8
7
6
4
1
5
3
2
To Next Page
Loading...
Need help?
General
