Fax Mode Settings
313
System Settings
10
Fax Mode Settings
In [Fax Mode Settings], you can make settings relating to the fax feature.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
The following shows the reference section for each item.
Screen Defaults ........................................................................................................................ 313
Fax Defaults ............................................................................................................................. 313
Fax Control............................................................................................................................... 315
File Destination/Output Destination......................................................................................... 318
Reduce/Enlarge Presets............................................................................................................ 319
Original Size Defaults .............................................................................................................. 319
Local Terminal Information..................................................................................................... 320
iFax Control.............................................................................................................................. 320
1 On the [System Settings] screen, select [System Settings].
For the method of displaying the [System Settings] screen, refer to System Settings Procedure (P.258).
2 Select [Fax Mode Settings].
3 Select the item to be set or changed.
Screen Defaults
You can set items relating to the [Fax/Internet Fax] screen.
Fax Screen Default
Set the default screen that appears when the [Fax/Internet Fax] screen is displayed.
Select from the [Fax Recipients Programming Screen], [General Settings], and [Address
Book] screens.
General Settings - 2nd Column
You can set the features that appear in the second column from the left of the [General
Settings] screen. By setting the most commonly used features, you can avoid extra
operations such as selecting tabs.
Address Book Default
Set the address number that appears at the top of the screen when the address book is
displayed.
Specify an address number in the range from 1 to 500.
Note • When the Speed Dial Extension Kit is installed, you can specify a value up to 999.
Transmission Screen
Set whether to display transmission status during transmission.
Fax Defaults
You can set the default values for the fax feature. When the power is turned on or the
machine returns from a Power Save mode, or when the <Clear All> button is pressed,
To Next Page
Loading...
Need help?
General
