Login Setup/Auditron Administration
349
System Settings
10
3 According to the selected item, set the processing to be applied to jobs.
îš„According to Print Auditron
Follows the settings for the [Printer Settings] under Login Setup/Auditron Mode (P.350) and
Auditron Mode (P.351).
Note • To restrict print job operations using the authentication feature, set [Login/Setup Auditron
Mode] to [Local Machine Access] or [Network Access], and also set [Printer] under [Auditron
Mode] to [On].
When [According to Print Auditron] is selected, [Job Login Success], [Job Login Failure] and
[Job without UserID] appear.
z
Job Login Success
Set the processing to be applied to successfully authenticated jobs.
- To print all received jobs, select [Print Job].
- To save received jobs using the Private Charge Print feature, select [Save in Private
Charge Print].
Note • When [Save in Private Charge Print] is selected, the Security Print, Sample Print, and
Delayed Print settings specified on the print driver will be ignored.
• When saving the print jobs in Private Charge Print, up to 24 characters for the User ID. If the
User ID set on the print driver exceeds 24 characters, a print job will be cancelled, and will
not be saved in Private Charge Print.
z
Job Login Failure
Set the processing to be applied to authentication failure jobs (whose information, such as
the user ID and password, has been incorrectly registered on the print driver).
- When [Save in Charge Print] is selected, all jobs received are saved.
- When [Cancel Job] is selected, jobs received are deleted.
z
Job without UserID
Set the processing to be applied to jobs with no user ID attached (such as print or e-mail print
jobs sent from CentreWare Internet Services).
- To print all jobs, select [Print Job].
- To save jobs using the Charge Print feature, select [Save in Charge Print].
- To delete jobs, select [Cancel Job].
Note • [Job without UserID] is changed to [Print Job] when you select as follows on CentreWare
Internet Serivces: [Properties] > [Auditron Settings] > [Non-Account Print]. When [Job
without UserID] is set to [Save in Charge Print] or [Cancel Job], the [Non-Account Print]
check box on CentreWare Internet Services is cleared.
îš„Save in Private Charge Print
Regardless of whether the authentication feature is being used or not, all jobs that have a
user ID are saved using the Private Charge Print feature.
Note • When [Save in Private Charge Print] is selected, the Security Print, Sample Print, and
Delayed Print settings specified on the print driver will be ignored.
• When saving the print jobs in Private Charge Print, up to 24 characters for the User ID. If the
User ID set on the print driver exceeds 24 characters, a print job will be cancelled, and will
not be saved in Private Charge Print.
When [Save in Private Charge Print] is selected, [Job without UserID] appears.
z
Job without UserID
Set how to process the e-mail print jobs with no user ID attached.
- To print all jobs, select [Print Job].
- To save jobs using the Charge Print feature, select [Save in Charge Print].
- To delete jobs, select [Cancel Job].
Note • [Job without UserID] is changed to [Print Job] when you select as follows on CentreWare
Internet Serivces: [Properties] > [Auditron Settings] > [Non-Account Print]. When [Job
without User ID] is set to [Save in Charge Print] or [Cancel Job], the [Non-Account Print]
check box on CentreWare Internet Services is cleared.
îš„Save in Charge Print
Regardless of whether the authentication feature is being used or not, all received jobs are
saved using the Charge Print feature.
To Next Page
Loading...
Need help?
General
