Fuji Xerox ApeosPort-II C4300 - Page 297

Copy Mode Settings
295
System Settings
10
Set the default density levels for the [Color Balance] in the [Image Quality] screen.
You can set density levels of cyan for each of the [Low Density], [Medium Density], and [High
Density].
Color Balance - Black
Set the default density levels for the [Color Balance] in the [Image Quality] screen.
You can set density levels of black for each of the [Low Density], [Medium Density], and [High
Density].
Color Shift
Set the default value for [Color Shift] in the [Image Quality] screen.
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Layout Adjustment] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Mixed Sized Originals
Set the default value for [Mixed Sized Originals] in the [Layout Adjustment] screen.
Edge Erase - Top & Bottom Edges
Set the default value for the amount of edges erased from the original in the top and bottom
directions in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm
in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for the amount of edges erased from the original in the left and right
directions in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm
in 1 mm increments.
Center Erase/Binding Erase
Set the default value for the binding erase amount of the original in [Edge Erase] in the
[Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm increments.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation Direction
Set the default value for [Image Rotation - Rotation Direction], if documents are of mixed
orientations.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Copy Output
Set the default value for [Copy Output] in the [Copy] screen.