Machine Components
29
Product Overview
2
No. Component Function
11 Top left cover Push up the unlock lever to access the insides of the machine to clear
paper jams and replace consumables.
12 Duplex module cover Open this cover to access the insides of the machine to clear paper
jams when the duplex module is installed.
13 Left center cover Open this cover to access the insides of the machine to clear paper
jams.
14 Bottom left cover Open this cover to access the insides of the machine to clear paper
jams.
15 <RESET> button Automatically turns the power off when detecting current leakage.
16 Parallel interface connector
(optional)
Connected to a computer using a Centronics standard interface cable.
17 USB 1.1 interface
connector
Used when using the Voice Assistant (optional).
18 10BASE-T / 100BASE-TX
connector
Connected to a network cable.
19 Fax interface connector Used to connect to the fax kit.
20 USB 2.0 interface
connector (optional)
Connected to a USB cable.
19
16
15
12
13
14
11
18
20
17
Tray 4
(high capacity)
Tray 3
(high capacity)
21
îš„Left Side and Back
îš„Tandem Tray Model + Side Output Tray
∗ The tandem tray model is available for the ApeosPort-II C4300, DocuCentre-II C4300 only.
To Next Page
Loading...
Need help?
General
