15 Problem Solving
452
Problem Solving
15
Unable to make color
copies.
Cause [Output Color] is set to [Black].
No Action Set [Output Color] to [Auto Detect] or [Color].
Refer to "Output Color (Selecting the Color to Copy)" (P.60).
The document edges are
missing on the copy.
Cause The document is larger than the printable area.
No Action Adjust [Reduce/Enlarge] to make the copy smaller.
Colors differ between the
original and the copy.
Cause Tonal reproduction is misconfigured.
No Action Perform calibration.
Refer to "Executing Calibration" (P.430).
Cause A document type appropriate for this document is not selected.
Action In [Original Type], select a type appropriate for the document.
Refer to "Original Type (Selecting the Document Type)" (P.65).
Documents are not
stapled.
Cause The Finisher is not attached.
Action A finisher is needed to perform stapling. Attach the Finisher, or
change the print option setting to cancel stapling.
Cause The number of pages to staple exceeds 50.
Action A maximum of 50 pages can be stapled. Reduce the number
of pages to 50 or less.
To Next Page
Loading...
