EasyManuals Logo

Fuji Xerox ApeosPort-II C4300 User Manual

Fuji Xerox ApeosPort-II C4300
635 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #516 background imageLoading...
Page #516 background image
15 Problem Solving
514
Problem Solving
15
035-743
035-744
035-745
O [Cause] Unable to communicate. The phone number is incorrect or
the destination machine does not have the feature you
specified.
[Remedy] Check the destination phone number, check also if the
destination machine has the feature you specified, and
then try again.
035-746
O [Cause] The fax network does not respond.
This may be caused by the following. Check them and
then send the fax again.
[Remedy] Is the telephone line correctly connected?
You may not have a fax network contract, or the fax
network may have a problem.
When connecting the machine to the fax network, enter
two pauses after "161" and "162", then dial the telephone
number.
035-747
035-748
O [Cause] The dialing or transmission was interrupted by the <Stop>
button.
[Remedy] No action is necessary.
035-749
O [Cause] The number was re-dialed the specified number of times,
but the destination machine did not respond.
[Remedy] Ask the recipient if the telephone line and telephone
switchboard for the destination machine are defective.
035-750
O [Cause] The communication was interrupted by a power-off
operation or with the <Reset> button.
[Remedy] Turn the machine's power switch on to send the fax again.
If the machine conditions are not improved by performing
the relevant remedy, contact our Customer Support
Center.
035-751
035-752
O [Cause] The dialing or transmission was interrupted by the <Stop>
button.
[Remedy] No action is necessary.
035-753
O [Cause] Memory became insufficient when attempting to receive
more than 999 pages of fax document.
[Remedy] Ask the sender to reduce the number of pages at one
transmission.
035-754
035-755
035-756
035-757
035-758
035-759
035-760
035-761
O [Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
035-762
O Refer to 034-508.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-II C4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-II C4300 and is the answer not in the manual?

Fuji Xerox ApeosPort-II C4300 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-II C4300
CategoryPrinter
LanguageEnglish

Related product manuals