16 Appendix
570
Appendix
16
2 Sided printing 12 Sets the 2-sided printing.
[0] (Default) : Off
[1] : Head to Head
[2] : Head to Toe
Important• When [Postcard] is selected for [Paper Size], [Head to Head] and
[Head to Toe] cannot be selected.
Note • This feature does not appear for some models. An optional package
is necessary. For more information, contact our Customer Support
Center.
Font 14
(alphanumeric
font)
Sets the font for 1-byte characters (ANK).
[0] (Default) : Roman
[1] : Sanserif
Important• Since this feature selects the default value, its setting will not be
affected when an extended command is received.
Print control 51
(Blank sheet
output)
Sets whether to print blank pages if included in the original.
[0] (Default) : Off
[1] : On
Note • Even when [Off] is selected, blank pages will be printed if they are
spaces created with user-defined characters or images in white
color.
• If [Off] is selected, and if 2 Up or 2-sided printing is specified, blank
pages will not be printed.
52
(Character
print area)
Extends the position of the right margin.
[0] (Default) : Standard
[1] : Extended
Important• If the character print area is changed from [Extended] to [Standard],
the left and right margins will be initialized to the default values.
• When the position of the right margin is set here, that position will be
the right edge of the character print area.
53
(Image
enhancement)
Sets whether or not to enable the Image Enhancement feature.
Image Enhancement makes border between black and white smooth,
with rough edges reduced, giving the appearance of higher resolution.
[0] : Off
[1] (Default) : On
Setting Item
Item
Number
Value
To Next Page
Loading...
Need help?
General
