Error Code
195
Problem Solving
11
005-907
005-908
005-913
[Cause]
A document jam occurred in the document feeder.
[Remedy]
Remove the jammed document.
z
Refer to "Document Jams" (P.208).
005-940 [Cause]
An error occurred in the document feeder.
[Remedy]
Press the control panel's <Stop> button, and set the document on
the document feeder again.
005-948 [Cause]
A document size mismatch error occurred in the document feeder.
[Remedy]
Press the control panel's <Stop> button, and cancel the job.
007-271 [Cause]
Tray 2 malfunction.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can
use a tray other than Tray 2.
010-311
010-312
010-320
010-327
010-379
010-392
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
010-602 [Cause]
Temperature sensor of the machine detected abnormality.
[Remedy]
The machine will automatically recover when the machine cools
down. Wait for a while, and try again.
016-372 [Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
016-500
016-501
016-502
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
016-570 [Cause]
A communication error occurred while scanning.
[Remedy]
Press the control panel's <Stop> button, and cancel the job.
016-571 [Cause]
A communication error occurred during print processing.
[Remedy]
The machine will automatically recover. Wait a moment, and try
again.
016-742
016-744
[Cause]
An error occurred.
[Remedy]
Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
016-749 [Cause]
An error occurred.
[Remedy]
Press the control panel's <Stop> button, and cancel the job.
016-759 [Cause]
A setting has been entered for the maximum number of permitted
copies, and has been reached. Alternatively, a user who has
reached their maximum number of copies logged in.
[Remedy]
Press the control panel's <Stop> button, and cancel the job.
016-776 [Cause]
A job is canceled.
[Remedy]
Press the control panel's <Stop> button, and cancel the job.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
