Systems on Server Units Working in Native BS2000 mode
U41855-J-Z125-3-76 115
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k05
5.4 Working in Native BS2000 mode
You can perform the following actions in Native BS2000 mode:
● Starting (IPL) and shutting down a BS2000 system, executing an IPL dump and
migrating
● Setting the options (only SU x86)
● Evaluating KVP logging
5.4.1 Starting (IPL) and shutting down a BS2000 system, executing an IPL
dump and migrating
You perform these actions with the Operation tab of the BS2000 system:
Ê Select Systems → [<se server>(SE<model>) →] <unit> (SU<model>) → BS2000, Operation
tab.
In the Actions group you can select one of the following actions:
● BS2000 shutdown (only for SU x86)
● BS2000 IPL
● BS2000 dump IPL
The following actions are only available for SU x86. The SU x86 also has to form an SU
Cluster with another SU x86 of the SE server configuration. Whether or not an LM (Live
Migration) is possible, depends on the cluster status. The second SU must also be in
the Native BS2000 mode operating mode. See also section “SU Cluster” on page 45.
Further details are provided in the "Cluster Solutions for SE Servers" whitepaper [8].
● Delete BS2000
This action prepares the SU as target SU for a migration.
● Restore BS2000
This action restores the SU after a failback (BS2000 was deleted).
● Migrate BS2000
Starts the wizard for the migration of the BS2000.
To Next Page
Loading...
Need help?
General