Fujitsu BS2000 User Manual

Managing units of the SE server Managing hardware
198 U41855-J-Z125-3-76
10.1 Managing units of the SE server
You manage the units of the SE server using the menu Hardware → Units (SE<model>).
When you expand this menu, all the existing units are listed.
If you manage a configuration of two SE servers in one Management Cluster, the units are
listed underneath Units in two SE server-specific submenus Hardware → Units → <se
server>(SE<model>).
10.1.1 Powering a unit on or off, rebooting a unit
Ê Select Hardware → Units, Units tab.
The Units tab displays information on all Management Units, Server Units, HNCs, and
Application Units of the SE server configuration.
i Notes:
– If, as in the example, at least one AU PQ is available, HW model is followed by
an additional Chassis column. In the case of AU PQ, the chassis of the AU and
the partitions are each displayed as single units. Actions are only possible for
partitions.
– For a configuration consisting of two SE servers in a Management Cluster:
–The Units menu does not contain a model name (it is displayed in the
submenu of the respective SE server instead).
– The table contains the additional Server column. This column contains the
name of the SE server to which the respective unit belongs.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English