Managing units of the SE server Managing hardware
250 U41855-J-Z125-3-76
10.1.7.3 Managing the IP configuration of the Application Unit
When managing the IP configuration, there are differences between Application Units PY
and Application Units PQ.
Managing IP configuration of an Application Unit PY
You manage the IP configuration of an AU PY using the associated Management menu, IP
configuration tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (AU<model>) →
Management, Configuration tab.
The IP configuration tab displays the groups Host name, IP network, Access data (only for AU
with the VMware vSphere operating system), and iRMC Access data.
The following functions are available:
Updating network data
You can cause the current data to be determined again and the display to be updated.
Ê In the IP network group click the Update network data icon and confirm the action.
A dialog with the Automatic update option is opened:
Ê If the AU is connected via MONPR01 IPv6, select Yes and confirm the action.
To Next Page
Loading...
Need help?
General