Session management Operating the SE Manager
78 U41855-J-Z125-3-76
3.2.2 Automatic update
Automatic update ensures that the data displayed in the main window is up to date. All the
data displayed is updated in each cycle, in particular:
● the object lists and their statuses in the working area
● the object lists and their statuses in the tree structure
For information on "working area" and "tree structure", see section “Main window” on
page 80.
Main windows with automatic updates are identified by the Update icon (wheel) in the right
upper corner of the main page. If there is currently an update in progress, the wheel is
rotating. If there is currently no update in progress, the wheel is greyed out. If you drag the
mouse cursor over the icon, the "Automatic update follows" tool tip is displayed. All main
windows for which an up-to-date status display is important, support automatic updates.
You can find the current list of these main windows in the online help.
By default an update cycle of 30 seconds is available for each user. Each user can change
this setting for himself/herself in the range from 10 through 120 seconds or exclude the
automatic update. The setting is specified in the Change update cycle and session timeout
dialog box (see section “Session timeout” on page 77). The individual setting is stored on
an account-specific basis.
3.2.3 Restricted operating mode
There may be situations in which the SE Manager does not have full access to all
resources. This may be the case if an MU is shut down or if time is needed for the
reconfiguration of the clusters.
In these situations, the operating mode for the active sessions is restricted for a short period
of time and no actions are possible. Access to BS2000 consoles, BS2000 dialogs and the
SVP is still possible.
The SE Manager indicates the restricted operating mode in the header of the main window
as follows:
In dialogs, the restricted operating mode is reported with the following message:
The functionality of the SE Manager is currently restricted! No actions possible!
As soon as the SE Manager has regained access to all resources, the restricted operating
mode is terminated automatically.
To Next Page
Loading...
Need help?
General