Systems on Application Units Operating virtual machines
U41855-J-Z125-3-76 149
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k06
6.2 Operating virtual machines
When an AU is operated with a hypervisor system, VMs can be configured (via this
hypervisor system). You operate the VMs of an AU using the menu item Virtual machines.
As soon as a VM has been configured, the tree structure below Systems →
[<se server>(SE<model>) →] <unit> (AU<model>) → Virtual machines is expanded by a VM-
specific menu <VM-Name>.
i In the case of AU PQ, systems run on the individual partitions of the AU. As soon
as a VM has been configured, the tree structure below Systems →
[<se server>(SE<model>) →] <unit> (<AU PQ model>) → <unit> (<partition>) →
Virtual machines is expanded by a VM-specific menu <VM-Name>. You can operate
the VM in this window.
Information on VMs
The VM overview tab provides information on the virtual machines which run on the AU
under a hypervisor (HyperV Windows Server, VMware vSphere, Oracle VM Server, Citrix
XenServer).
Ê Select Systems → [<se server>(SE<model>) →] <unit> (AUxx) → Virtual machines, VM
overview tab.
On AU PQ select Systems → [<se server>(SE<model>) →] <unit> (<AU PQ model>) →
<unit>
(<partition>)
→ Virtual machines, VM overview tab.The VM overview tab displays the configured VMs.
Operating a VM
In the VM-specific menu you receive detailed information on the VM. Depending on the
situation, you can also execute an action directly for the VM (e.g. starting a VM).
Ê In the tree structure select Systems → [<se server>(SE<model>) →] <unit> (AUxx) →
Virtual machines → <VM-name>.
On AU PQ select Systems → [<se server>(SE<model>) →
] <unit> (<AU PQ model>) →
<unit>
(<partition>)
→ Virtual machines → <VM-name>.The Operation tab opens and in the Status group displays the properties and current
status of the VM.
To Next Page
Loading...
Need help?
General