Users Managing authorizations
308 U41855-J-Z125-3-76
12.1.4 Displaying sessions
The Sessions tab informs the administrator about all sessions of users who are currently
logged in on the SE Manager of a Management Unit of the SE server or Management
Cluster.
Ê Select Authorizations → Users, Sessions tab.
The Sessions tab provides information on the sessions of the users currently logged in. The
local Session is highlighted.
In addition to the information on the user and IP address of the PC, the current individual
settings for the session are also displayed.
The Management Unit column is only displayed for multi-MU configurations. It informs on the
scope of the session:
– For a global session, which is valid for all MUs of the SE server configuration, - (global)
is displayed. No new login is required for switching to one of the other MUs.
– In a local session, the name of the MU for which the session is valid, is displayed. You
must log in again when you switch to another MU. When logging in on the SE Manager,
a local session is only created if the MU is addressed via the IP address or if it has not
been entered in the DNS.
To Next Page
Loading...
Need help?
General