SVP console on Server Unit /390 Systems on Server Units
114 U41855-J-Z125-3-76
5.3 SVP console on Server Unit /390
A Server Unit /390 is operated via the SVP (service processor). Some important SVP
functions, for instance for IPL or IORSF, are also available directly on the SE Manager.
Alternatively, SVP functions can be called under menu control on an SVP console via SVP
frames. The SVP console is accessed via the SE Manager:
Ê Select Systems→ [<se server>(SE<model>) →] <unit> (SU</390>), BS2000 operation mode
tab.
Ê In the SVP console group click Open.
The SVP console window opens.
You can operate the SVP console in the familiar manner. A detailed description of how to
operate the SVP is provided in the "Server Unit /390" Operating Manual [2].
Alternatively, you can open the SVP console via PuTTY, by using the CLI command
svpConsole. A detailed description is provided in chapter “Appendix”, section “SVP console
on MU or SU /390” on page 340.
To Next Page
Loading...
Need help?
General