Setting BS2000 operation mode Systems on Server Units
110 U41855-J-Z125-3-76
5.1.2 Server Unit x86
Ê Select Systems→ [<se server>(SE<model>) →] <unit> (SU<x86>), BS2000 operation mode
tab.
The BS2000 operation mode tab in the BS2000 operation mode group displays the operation
mode set (Native BS2000 mode or VM2000 mode) and permits this setting to be changed:
Changing the operation mode
You can change the operation mode only when BS2000 is not active. In VM2000 mode this
applies for all BS2000 VMs.
Ê Click the Change icon and confirm the switch to the other operation mode.
i When you switch mode, the Automatic IPL option is implicitly set to No. This setting
can be changed again after the operation mode has been changed successfully
(Options or VM options tab).
To Next Page
Loading...
Need help?
General