Fujitsu BS2000 User Manual

Managing hardware Managing units of the SE server
U41855-J-Z125-3-76 235
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
10.1.5.6 Managing updates
Fundamental information on updates is provided in section “Maintenance and remote
service” on page 71.
You manage updates of the HNC using the associated Service menu, Update tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (HNC) → Service,
Update tab.
On the Update tab, an expandable group is displayed for the Security fixes and Hot fixes
software updates.
With the exception of the Add-on packs, the functionality of the tab is the same as that for the
MU (see section “Managing updates of the Management Unit” on page 217).
10.1.5.7 Managing configuration data (CSR) of the HNC
You use a CSR backup (CSR = Configuration Save and Restore) to back up the
configuration data of the HNC in an archive. The backup archive contains the entire
configuration of the basic system. Each backup archive has a creation date and an archive
name.
A CSR backup enables the configuration of the HNC at the time the backup was made to
be restored.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (HNC) → Service, CSR
tab.
You can use the CSR tab to upload, download, and delete configuration data backups.
The functionality of the tab is the same as that for the MU (see section “Managing
configuration data (CSR) of the MU” on page 220).
i Recommendation: Perform a CSR backup after each HNC-specific configuration
change.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English