Fujitsu BS2000 - Displaying Hardware Information of the Application Unit

Managing units of the SE server Managing hardware
248 U41855-J-Z125-3-76
On the Management Unit the messages forwarded from the Application Units are filtered
further and sent to the Service Center using the remote service procedure AIS Connect.
The Application Unit thus reports on hardware errors to the Management Unit in two ways:
● Trap forwarding from the iRMC
● Trap forwarding from the Management Board
10.1.7.2 Displaying hardware information of the Application Unit
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (AU<model>) →
Information, Overview tab.
The Overview tab displays hardware information on the selected unit.