Fujitsu BS2000 User Manual

Opening the BS2000 console and dialog window Systems on Server Units
112 U41855-J-Z125-3-76
5.2 Opening the BS2000 console and dialog window
The BS2000 console and dialog window is opened using the Operation tab.
Ê Open the Operation tab. Depending on the mode in which BS2000 is running
(Native/VM2000) and on the SU type on which it resides (SU /390 or SU x86), you reach
the tab as follows:
Ê Native BS2000: Select Systems → [<se server>(SE<model>) →] <unit> (SU<model>)
→ BS2000, Operation tab.
Ê VM2000 on SU /390: Select Systems → [<se server>(SE<model>) →]
<unit> (SU</390>) → Virtual machines→ <bs2000-vm>, Operation tab.
Ê VM2000 on SU x86: Select Systems → [<se server>(SE<model>) →]
<unit> (SU<x86>) → Virtual machines → BS2000 → <bs2000-vm>, Operation tab.
Ê In the Console and dialog group, click Open by the required function (BS2000 console or
BS2000 dialog).
The BS2000 console window or BS2000 dialog window opens.
Alternatively, you can open a BS2000 console or a BS2000 dialog via PuTTY, by using the
CLI commands bs2Console and bs2Dialog. A detailed description is provided in chapter
“Appendix” on page 331.
Messages on the BS2000 console
The base system M2000 or X2000 issues messages on the BS2000 console. On an SU
/390 these messages are issued by the M2000 of the MU, and on an SU x86 by the X2000
of the SU. With the exception of the messages for write operations to CDROM/DVD, these
messages are not issued via the BS2000 system component MIP (Message Improvement
Processing) and are therefore not stored in a BS2000 message file.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English