Working with EMDS Appendix
352 U41855-J-Z125-3-76
14.2 Working with EMDS
If you open an operation instance BS2000 terminal in the SE Manager or via PuTTY, after
successful authentication the EMDS application will start automatically and provide the
"terminal" functionality. Alternative accesses are available in addition to the accesses to the
BS2000 console and BS2000 dialog using the SQ Manager:
14.2.1 Using shortcuts for special characters
When you work with EMDS, special characters are available which you can access by
means of shortcuts. The table below shows the most important shortcuts:
Hold down the [Shift] key when you press an [Fn] key. Press the [Esc] key once briefly
before you press [Fn] or [Shift] - [Fn].
14.2.2 Using programmable keys (pfkeys)
You can use programmable keys (pfkeys) when you work with EMDS. Proceed as follows
to assign values to the pfkeys:
Ê Press [Esc] [Shift] - [F11] in the EMDS window (PP in the table above).
Keys F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
NIL LZF LVD K1 K2 K3 MAR ED EM DUE1
Shift EFZ AFZ LZE LSP F1 F2 F3 RS WAZ SY AM DUE2
Esc P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 LA1 HC
Esc Shift P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 PP SC
Table 7: EMDS – Shortcuts for special characters
To Next Page
Loading...
Need help?
General