Operating the SE Manager SE Manager interface
U41855-J-Z125-3-76 79
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k03
3.3 SE Manager interface
The sections below describe the interface of the SE Manager and introduce terms which
are used in the manual.
3.3.1 Window types
Various window types are used in the SE Manager:
● Login window: a window in which you log in using your account and password.
See section “Logging in” on page 75.
● Main window: a window which is always visible between logging in and logging out on
the SE Manager; it contains the navigation elements and the workarea in which
information is output and actions are initiated.
See section “Main window” on page 80.
● Terminal window: a window which is opened from the SE Manager and enables
access to the BS2000 console, BS2000 dialog, SVP console or the shell of the MU. A
terminal window can only be opened when there is an active session and subsequently
remains open irrespective of the SE Manager's session.
See section “Terminal window” on page 83.
● Dialog box: a window which opens when an action starts and closes again after the
action has been completed. It is also used to output error messages concerning the
action being performed.
See section “The dialog” on page 85.
● Wizard: a utility which guides you step by step through a sequence of windows
(dialogs) to perform a task.
See section “The wizard” on page 86.
● Help window: Window which opens in a separate tab or window of the browser when
you call the online help.
See section “Calling the online help” on page 97.
To Next Page
Loading...
Need help?
General