Fujitsu BS2000 User Manual

Managing IP networks Managing hardware
268 U41855-J-Z125-3-76
10.2.3.3 Managing members of a DANPR network
You can display the active MAC addresses and add or remove ports (members of the
network) for each DANPR.
Proceed as described in section “Managing a Data Network Public”.
i Caution:
After assigning a port of a unit in the untagged mode to a network, that port cannot
be assigned to an additional network.
In dual mode, assigning the port for other networks is only possible as tagged.
10.2.3.4 Configuring the ACL settings of the DANPR network
You can add and delete ACL entries for each DANPR.
Ê Select Hardware → IP networks → Data Network Private → DANPR<no>, ACL tab.
Proceed as described in section “Configuring the ACL settings of the DANPU network”.
10.2.3.5 Information on the performance and utilization of the DANPR ports
An overview of the performance and utilization of the ports belonging to the network is
provided by the Performance tab.
Ê Select Hardware → IP networks → Data Network Private → DANPR<no>, Performance tab.
The Performance tab displays the ISL performance view and Unit performance view tables.
Detailed information is provided in section “Information on the performance and utilization
of the DANPU ports”.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English